Q1: Why is my white polish dragging and creating ridges when I draw the tip?
A1: This occurs when white polish has too little solvent or sits exposed to the air for too long. If the polish begins to dry while you are still working with it, the brush bristles drag through partially cured resins. Use a fresh drop of polish on a palette, work quickly, and switch to a high-density, streak-free formula that reaches opacity in a single pass.
Q2: How do I stop the silicone stamper from smudging down the front of my finger?
A2: Smudging indicates either too much polish on the stamper or pressing down too deep. Apply a thin, even coat of white paint across the pad and push your finger in just enough to coat the tip (roughly 2 to 3 millimeters). Wipe excess polish off the surrounding skin immediately using a cleanup brush dipped in acetone.
Q3: How long should I wait between my base coat and painting the white lines?
A3: If painting freehand or using a silicone stamper, wait 3 to 5 minutes until the base coat feels dry to a light touch. If using adhesive guide stickers, wait at least 15 minutes, or use a quick-dry drop solution beforehand; otherwise, peeling the tape will tear the base color right off your nail plate.
